angle of contact
英 [ˈæŋɡl ɒv ˈkɒntækt]
美 [ˈæŋɡl əv ˈkɑːntækt]
接触角
双语例句
- The influence of the pile type and the friction angle of the contact surface on the limit bearing capacity of the piles and the composite foundation is discussed with an example.
通过算例，讨论了桩型及桩土接触面上的摩擦角对散体材料桩及其复合地基极限承载力的影响。 - Numerical analysis of the deformation and angle of contact of the high speed-angular contact ball bearing;
角接触球轴承作为高速电主轴的核心部件，其性能直接影响电主轴的性能。 - To avoid sliding that occurs in cylindrical roller thrust bearings, the taper angle of the rollers is selected so the extended contact lines intersect on the bearing axis.
为了避免推力圆柱滚子轴承发生滑动，滚子的锥度要合适以至于扩大的接触线可以与轴承轴相交。 - Lastly we gave some reasons for these results from the angle of social contact.
最后从社会交往角度尝试分析了导致这些人格特征差异的原因。 - Analysis and experiment on the taper angle of contact surface of bend rotation ultrasonic micromotors
弯曲旋转超声电机接触界面锥形角的分析与实验 - Influences of the variation of initial angle of frictional facing on the contact pressure and the efficiency factors were analyzed.
分析了摩擦衬片初始角变化对接触压力及效能因数的影响。 - 4) the equation of the angle between the direction of instantaneous contact line and relative velocity(?) The speed of gravity
瞬时接触线方向与合速度（？）引力的速度 - The results show that the amplitude of the liquid bridge radius is lower, and the contact angle is smaller, but the range of contact line ′ s movement is larger than the equal-size water droplets in coalescence of non-equal-size water droplets.
结果表明，非等直径水滴聚合后的液桥半径的振幅小，接触角小，接触线的收缩与扩张幅度较大。 - The results of ESCA showed poly ( siloxane) moved to and was rich on the surface of the blend, making the angle of contact big, being hydrophobic.
接触角和ESCA测定结果表明：聚硅氧烷向共混物表面迁移，富集在共混物表面，使其接触角增大，具有憎水性。 - In this paper, a mathematical method will be demonstrated to determine the taper angle of contact surface of C-USM.
先论证了一种数学方法去推算这种弯曲旋转超声电机接触界面的锥角计算公式。 - Engineering Analysis on Posture Angle of Angular Contact Ball Bearings
角接触球轴承姿态角工程分析 - Study on the Angle of Contact and the Wetting of Salicylic Acid in the Measuring Solution Methanol-Water System
水杨酸在甲醇-水测定体系的接触角和润湿性能研究 - The numerical isothermal solutions were obtained and the results were discussed. It was found that the directions of the combined entrainment velocity varied with varying directions of the two surface velocities, while the slanting angle of the contact ellipse within the calculation field also varied therewith.
结果表明：随着两表面速度方向的改变，合卷吸速度的方向不断变化，接触椭圆在计算域内的倾斜角度也随之改变； - Destabilizing pattern is mainly related to the friction angle φ and cohesion force C of contact surface ( between beam body and surrounding rock).
失稳形式主要与接触面（梁体与围岩之间）的摩擦角φ和粘聚力C有关； - The solution of rolling element posture angle of angular contact ball bearing is always difficult question. In general, it can be calculated by Jones's raceway control theory or solved by Gupta and Harris's dynamics theories.
角接触球轴承滚动体姿态角的求解历来是一较难处理的问题，通常采用Jones的滚道控制理论计算，或者采用Gupta和Harris的两种动力学理论求解。 - The activity index and angle of contact of different coupling agents were determined, and the effects of solvent, pH, temperature and dispersion time on the modification by silane coupling agent were studied. The results of the modification were characterized by means of FTIR.
考察了溶剂、pH值、温度及分散时间对硅烷类偶联剂改性效果的影响，采用活化指数、接触角以及傅立叶变换红外光谱对改性结果作了表征。 - The article analyzes the importance of effective fi-nance regulatory to long-term economic growth from the angle of Inherent contact between finance regulatory and economic growth.
本文从金融监管与经济增长内在联系的角度分析了有效金融监管对于长期经济增长的重要意义。 - The article proposes the model of elastic deformation between ball and race of recirculating ball screw and nuts under preload with variable lead single mut and the calculation method for actual contact angle. The values of reasonable original design contact angles are also recommended.
本文提出了在预载过盈条件下，单螺母变位导程预加负荷滚珠丝杠副钢球和滚道弹性接触变形模型及实际接触角的计算方法，还推荐了合理的原始设计接触角。 - Analysis on Contact Angle Measure of Angular Contact Ball Bearing
角接触球轴承接触角的测量分析 - Angle of contact dependence of micro-discharge extinction potential at triple junction
绝缘支柱微小放电熄灭电位的接触角依存性 - It shows that micro-discharge extinction potential drops along inverted catenary with the reduction in angle of contact.
即随着接触角角度的减小，微小放电熄灭电位沿倒置的悬链线下降。 - The formulas for setting angle and entrance angle of disc cutters are derived by using the contact condition of space curve.
利用空间曲线相切条件导出了用于计算盘形刀具安装角和切入角的条件； - The results show that the transmission ratio of magnetic metal belt transmission increases when magnetic induction density, initial tension and center distance increases, and decrease when angle of contact and diameter of the smaller belt pulley increases.
结果表明，磁力金属带传动的传动比随磁感应强度、初张力及中心距的增大而增大，随围包角及小带轮直径的增大而减小。 - With introduction of the contact line characteristic parameter, λ′, describing the slipping degree of ACL on the precursor film, the relationship between the dynamic contact angle and the velocity of moving contact line were derived.
在Moffatt角区内部流动解的基础上，通过引入接触线特征参数表征表观接触线在前驱膜上的滑移程度，导出动态接触角的速度关系。 - The change of angle of contact with reaction temperature were mostly obvious at 80~ 100 ℃.
接触角随反应温度的变化在80～100℃间最明显。 - FEA explained that the increase in wall formation with increase in wall angle is because of increase in contact pressure and compressive stresses along tool axis.
有限元分析结果表明，挤出飞边现象的加剧是由于工具头轴向上的接触力和压应力增加造成的。 - The paper through the surface roughness and the angle of contact experiment has carried on the confirmation to the above result.
文章通过表面粗糙度和接触角实验，对上述结果进行了验证。 - The main research contents include the variation of the dynamic contact angle and the effects of dynamic contact angle on the oscillating of the spreading length and the height.
研究内容包括液滴在铺展过程中动态接触角的变化形式，及液滴动态接触角对液滴铺展半径和高度的振荡特性的影响。